Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taromid A 280 R1 - PA66 - Taro Plast S.p.A.

Material Data Center offers the following functions for Taromid A 280 R1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Taromid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 12 g/10min ISO 1133
Temperature 280 °C -
Load 1 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 65 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 2700 MPa ISO 178
ASTM Data
Izod Impact notched, 1/8 in 70 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 256 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 75 °C ISO 75-1/-2
Vicat softening temperature, B 220 °C ISO 306
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 1.0 mm -
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 1.6 mm -
Limiting Oxygen Index 24 % ASTM D 2863
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 550 - IEC 60112
Other propertiesValueUnitTest Standard
Water absorption 6 % Sim. to ISO 62
Density 1100 kg/m³ ISO 1183
Characteristics
Additives
Release agent
Special Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Features
Low Odor
Chemical Resistance
General Chemical Resistance, Solvent Resistance, Oil Resistance
Applications
Automotive, Electrical and Electronical
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.